Key takeaways
- Inputs: One microphone input is enough for a solo creator. Two combo XLR and quarter-inch inputs help if you record a guitar and voice, or a guest.
- Preamp gain: This matters most for quiet dynamic microphones. Audient lists a 58dB gain range on the EVO 4 and Focusrite lists 57dB for the Solo.
- Phantom power: 48V phantom power is needed by most condenser microphones. All three models here provide it.
- Headphone output: Power is listed at 32mW into 33 ohms for the Scarlett Solo, and for the EVO 4 about 45mW at 30 ohms. Both suit typical headphones. Very high-impedance studio headphones may need more.
- Resolution: 24-bit and 96kHz is more than enough for voice. Higher rates add file size without a meaningful difference for speech.
- Drivers: Mac works without drivers on class-compliant devices. Windows users often need a driver for low-latency performance.
For most people recording a single microphone or streaming under $150, the Audient EVO 4 is the easiest interface to live with because of its automatic gain setting and loopback, the Behringer UMC202HD is the straightforward budget option with two mic inputs and phantom power, and the Focusrite Scarlett Solo 4th Gen is the step-up pick for singer-songwriters whose budget stretches slightly past the cap. This guide explains what an audio interface does, which stated specs matter for a home setup, and how these models differ.
Our top picks
As an Amazon Associate we earn from qualifying purchases at no extra cost to you.
What an audio interface does for you
An audio interface is a small box that connects professional microphones and instruments to a computer through USB. It supplies the microphone preamp, phantom power for condenser microphones, a high-quality analog-to-digital converter and a headphone output with a monitoring control. If you only use a USB microphone, you do not need one. If you want an XLR microphone such as a dynamic broadcast mic, or a guitar, or a second microphone for a guest, an interface is the right tool.
Gamers and streamers should note a related feature: loopback. It lets the interface send your computer’s audio (game, music, chat) back into your recording or streaming software alongside the microphone. Audient lists Audio Loop-back on the EVO 4, and Focusrite lists loopback on the Scarlett Solo. Because 57 to 58dB of gain can be marginal for very quiet dynamic microphones, reviewers sometimes suggest an inline gain booster for those.
Specs that matter and specs that do not
- Inputs: One microphone input is enough for a solo creator. Two combo XLR and quarter-inch inputs help if you record a guitar and voice, or a guest.
- Preamp gain: This matters most for quiet dynamic microphones. Audient lists a 58dB gain range on the EVO 4 and Focusrite lists 57dB for the Solo.
- Phantom power: 48V phantom power is needed by most condenser microphones. All three models here provide it.
- Headphone output: Power is listed at 32mW into 33 ohms for the Scarlett Solo, and for the EVO 4 about 45mW at 30 ohms. Both suit typical headphones. Very high-impedance studio headphones may need more.
- Resolution: 24-bit and 96kHz is more than enough for voice. Higher rates add file size without a meaningful difference for speech.
- Drivers: Mac works without drivers on class-compliant devices. Windows users often need a driver for low-latency performance.
At a glance
| Model | Inputs and outputs | Key stated specs | Best for | Limits |
|---|---|---|---|---|
| Behringer UMC202HD | 2 combo XLR/quarter-inch mic inputs, 2 line outputs, 1 headphone output | Two Midas-designed preamps, 24-bit, sample rates 44.1 to 192kHz, switchable +48V phantom power, direct monitoring switch, USB 2.0, pad switch | Two microphones on a tight budget | Windows needs a driver download. Loopback is not listed on the maker page |
| Audient EVO 4 | 2 analog in and out over USB-C, 2 EVO mic preamps, JFET instrument input, headphone output | 58dB gain range, 48V phantom power, up to 96kHz, Smartgain, Audio Loop-back, 140 x 67 x 67mm, 360g | Streamers and beginners wanting automatic gain | Headphone power is moderate |
| Focusrite Scarlett Solo 4th Gen | 1 mic preamp, 1 Hi-Z instrument input, 2 balanced line outputs, 1 headphone output | 57dB gain, 24-bit/192kHz, 120dB dynamic range on line outputs, two Air modes, loopback, USB-C bus power, three-year warranty | Singer-songwriters and single-mic creators | Only one mic input. Listed just above this cap |
Behringer UMC202HD: two preamps for the least money
Behringer describes the UMC202HD as a two-input USB interface with two Midas-designed microphone preamps on combo connectors. It lists 24-bit resolution with sample rates from 44.1 to 192kHz, switchable +48V phantom power, a quarter-inch stereo headphone output with its own level knob and a direct monitoring switch for zero-latency listening. It runs on USB 2.0 without an external power supply, and it provides signal and clip LEDs, a pad switch and line or instrument selectors. On Mac it is class-compliant; on Windows you download a driver from the maker’s site.
It is the practical choice if you want two microphones, for example a host and a guest, without spending much. The trade-offs are a plain feature set and no automatic setup helpers. Beginners need to set gain by watching the clip light.
Audient EVO 4: the beginner-friendly option
The EVO 4 is described by Audient as the most compact interface in the EVO range, with two EVO mic preamps, a JFET instrument input and a USB-C connection. Smartgain sets your input level automatically after you speak or play for a few seconds, and Audio Loop-back records computer audio alongside your microphone. Audient lists a 58dB gain range, 48V phantom power, a 113dB dynamic range, headphone power of about 45mW at 30 ohms and sample rates up to 96kHz. It weighs 360 grams and measures 140 x 67 x 67mm.
Audient’s page positions it for solo musicians, singer-songwriters, beatmakers, podcasters and streamers. Its listed headphone power is moderate, so very demanding studio headphones may want a dedicated amplifier. It suits someone who wants to plug in and start without learning gain staging.
Focusrite Scarlett Solo 4th Gen: step-up polish
Focusrite describes the Solo as the songwriter’s 2-in, 2-out interface. It has a single microphone preamp with a 57dB gain range, a Hi-Z instrument input, two balanced line outputs and a headphone output rated at 32mW into 33 ohms. Resolution is 24-bit/192kHz, with a dynamic range of 120dB on the line outputs. Two Air modes, Presence and Harmonic Drive, shape the sound, and Dynamic Gain Halos show levels visually. Loopback is supported, it is powered over USB-C, and Focusrite includes a software bundle with Ableton Live Lite, Pro Tools Intro+, Cubase LE and a plug-in collection, plus a three-year warranty.
The maker’s listing sits just above this guide’s cap, so treat it as a stretch option if your budget has some flexibility. Having one mic input is a real limit for two-person setups.
Fit, power and cable notes
- Bus power: These interfaces are powered by USB. Scarlett lists a 900mA requirement. Powered hubs and long extension cables can cause dropouts, so plug directly into the computer.
- Microphone choice: Dynamic microphones usually need more gain than condensers. The Solo and EVO 4 preamps are listed at 57 and 58dB respectively, which is typical for entry-level interfaces but can fall short with low-output dynamics.
- Phantom power safety: Switch off phantom power before connecting or disconnecting some ribbon microphones and follow the microphone maker’s manual.
- Cables: You need an XLR cable for microphones. Guitar uses a standard instrument cable on the instrument input.
- Monitors: Line outputs connect to powered speakers with balanced cables, or with an adapter.
Pick X if you need Y
| If you… | Pick | Why |
|---|---|---|
| Need two microphone inputs on a small budget | Behringer UMC202HD | Two combo inputs with phantom power |
| Want automatic gain and simple streaming loopback | Audient EVO 4 | Smartgain and Audio Loop-back listed by the maker |
| Record one voice and one guitar | Focusrite Scarlett Solo 4th Gen | Mic preamp plus Hi-Z instrument input, Air modes |
| Want a software bundle for songwriting | Focusrite Scarlett Solo 4th Gen | Bundle with DAW and plug-ins listed |
| Use a quiet dynamic microphone | Audient EVO 4 or Scarlett Solo | Gain ranges of 57 to 58dB, though very quiet dynamics may want a booster |
Budget tiers inside the cap
At the budget end, the Behringer UMC202HD gives you two preamps and the essentials. In the middle of the cap, the Audient EVO 4 adds convenience features, compact build and loopback. Just above the cap, the Focusrite Scarlett Solo adds a three-year warranty, a software bundle and more refined monitoring. Most voice work sounds good on any of them; the difference is in convenience and extras, not a night-and-day change in recording quality.
Alternatives
- PreSonus AudioBox GO and Studio 24c: Compact 2×2 interfaces in a similar class; the larger Studio 24c lists a higher resolution and sits closer to the top of this range.
- A USB microphone: If you only need one microphone and no instruments, a USB model avoids the extra box. See the USB microphone guide in this series.
- A USB mixer: Better when you want multiple sources with faders, though it takes more desk space.
Frequently Asked Questions
Do I need an audio interface to stream?
Not if you use a USB microphone. You need an interface if you want to use an XLR microphone or to connect more than one source. An interface also gives you a separate headphone volume control and a cleaner preamp than most motherboards provide.
What is phantom power?
Phantom power is a 48V supply sent down the microphone cable to power condenser microphones. Dynamic microphones do not need it. Follow your microphone’s manual before switching it on.
Is 192kHz better than 96kHz?
For voice and streaming, there is no practical benefit. Higher rates mean larger files. Choose an interface for its preamps, drivers and features, not the highest sample-rate number.
Will these work with consoles?
Interfaces are designed for computers and mobile devices. Some work with consoles through additional setups, but the makers listed here do not describe console use, so assume a computer is required.
Do I need a driver on Windows?
Behringer says Windows users download a driver from its website. Other makers provide their own installers for low-latency performance. Mac computers typically work without extra drivers.
What does loopback do?
Loopback routes your computer’s playback audio back into the recording stream. Streamers use it to capture game or music audio along with their voice, without extra cables.
Read next
- Best Gaming DAC under $150: Picks and What to Look For (2026)
- Best PC Soundbar under $150: Picks and What to Look For (2026)
- Best USB Microphone under $100: Picks and What to Look For (2026)
- Best Dynamic Microphone under $100: Picks and What to Look For (2026)
- Best Wireless Gaming Headset under $100: Picks and What to Look For (2026)



