Key takeaways
- USB, XLR or both? USB is plug-and-play. XLR needs an audio interface but allows upgrades. A hybrid covers both.
- Do you need monitoring? A headphone jack on the microphone lets you hear yourself without delay. Samson lists one on the Q2U, and listings show one on the AM8 that works in USB mode.
- Do you need software control? Shure’s MV6 Gen 2 uses the MOTIV Mix desktop app for EQ and presets. The Q2U needs no driver.
- How will it mount? Desk stands make it easy to start, but a boom arm gets the microphone to the right distance without hogging desk space.
For most buyers under $100, the Samson Q2U is the dynamic microphone to start with because it offers both USB-C and XLR outputs and comes with its cables and stand, the Fifine AmpliGame AM8 suits gamers who want an RGB, mute-button desk microphone, and the Shure MV6 Gen 2 suits people who want a USB gaming microphone with onboard noise reduction and level control, though it is typically sold at or above the top of this budget. This guide explains why a dynamic microphone is a different tool from the more common condenser, what the makers state about each model, and how to place and connect one.
Our top picks
As an Amazon Associate we earn from qualifying purchases at no extra cost to you.
Why choose a dynamic microphone
A dynamic microphone uses a moving coil rather than a thin electrically charged diaphragm. In practice that means lower sensitivity, which is an advantage when your room is not quiet. A dynamic microphone used close to the mouth captures your voice strongly and relatively little of the keyboard, fan, air conditioning or the room echo that a condenser would pick up at the same distance. The trade-off is that it demands closeness, typically a few inches, and benefits from more preamp gain when used through an XLR interface.
Questions to ask before buying:
- USB, XLR or both? USB is plug-and-play. XLR needs an audio interface but allows upgrades. A hybrid covers both.
- Do you need monitoring? A headphone jack on the microphone lets you hear yourself without delay. Samson lists one on the Q2U, and listings show one on the AM8 that works in USB mode.
- Do you need software control? Shure’s MV6 Gen 2 uses the MOTIV Mix desktop app for EQ and presets. The Q2U needs no driver.
- How will it mount? Desk stands make it easy to start, but a boom arm gets the microphone to the right distance without hogging desk space.
At a glance
| Model | Connection | Key stated specs | Best for | Limits |
|---|---|---|---|---|
| Samson Q2U | USB-C and XLR | Dynamic, cardioid, 50Hz to 15kHz, 44.1 and 48kHz, headphone output with level control, on/off switch for both outputs | Starter setups with an upgrade path | Narrower frequency range, handheld look |
| Fifine AmpliGame AM8 | USB and XLR | Cardioid dynamic, RGB accents, mute button, live monitoring, yoke with 5/8 and 3/8 inch threads | Gaming desks that want lighting and mute control | XLR cable not included. RGB, mute and function keys do not work in XLR mode |
| Shure MV6 Gen 2 | USB-C | Dynamic cardioid, auto level, real-time denoiser, 5-band EQ, digital popper stopper, USB-C to USB-C cable and desktop stand in the box | Voice chat in noisy rooms, phone and tablet use | No XLR output listed. Typically sold at or above the top of the budget |
Samson Q2U: the proven hybrid
The Q2U is a cardioid dynamic microphone with a USB-C digital output and an XLR analog output. Samson lists a 50Hz to 15kHz frequency response, 44.1kHz and 48kHz sample rates and a 3.5mm headphone output with level control for zero-latency monitoring. An on/off switch controls both outputs. The microphone needs no driver installation and works with most recording software. The package includes a mic clip, a tripod stand with an extension, a foam windscreen, a 2.25m USB cable and a 3m XLR cable.
It is a sensible first dynamic microphone because you can begin on USB today and later add an audio interface without replacing it. Its character is more focused and less airy than a condenser, and the frequency range stops at 15kHz. For spoken word, streaming and chat, that is rarely a problem. If you plan to use it on a boom arm, the included tripod can be set aside.
Fifine AmpliGame AM8: gaming looks with dual connections
Fifine presents the AM8 as a USB and XLR dynamic microphone with a cardioid pattern, RGB accents, a mute button and live monitoring. The maker’s page notes that no XLR cable is included, that the RGB lighting, mute button and function keys do not work in XLR mode, and that the yoke accepts standard 5/8 and 3/8 inch threads, which makes boom arms straightforward. Retailers list it in black, white and pink.
That list is useful: it tells you the AM8 is most convenient as a USB microphone, and that the XLR route is mainly for later upgrades. Other numerical specifications such as sensitivity and maximum SPL differ between the variants and listings, so look at the exact variant before comparing it with others. The AM8 suits people who want visible indicators and a one-touch mute for chat.
Shure MV6 Gen 2: the processing-heavy USB option
Shure describes the MV6 Gen 2 as a USB gaming microphone with a dynamic cardioid pickup. Its feature list is the longest here: an auto level mode that keeps your level steady, an adjustable real-time denoiser, saved presets, a 5-band EQ and a digital popper stopper. It connects over USB-C to PC, Mac, iOS and Android devices, and works with Shure’s MOTIV Mix desktop app and MOTIV Audio and Video apps. The box holds the microphone, a 2m USB-C to USB-C cable and a 12cm round desktop stand.
Retail listings give a 50Hz to 15kHz response with a 24-bit/48kHz converter and a 5/8 inch mounting thread; confirm with Shure. No XLR output is listed, so it is a USB-only route compared with the Q2U and AM8. It is generally sold at or above the top of this cap, so decide whether the processing features justify that.
Placement, fit and care
- Distance: Keep the capsule a few inches from your mouth, slightly off-axis, so air from plosive sounds does not hit it directly.
- Windscreen: Use the foam cover, particularly on the Q2U, which ships with one.
- Arm threads: The Fifine yoke lists 5/8 and 3/8 inch threads. Check that your boom arm adapter matches whichever model you buy.
- Interface gain: If you move to XLR, a dynamic microphone often needs a preamp with generous gain.
- Cleaning: Wipe with a dry cloth. Wash foam windscreens in mild soapy water and let them dry fully.
Pick X if you need Y
| If you… | Pick | Why |
|---|---|---|
| Want to start with USB and grow into XLR | Samson Q2U | Both outputs, cables and stand included |
| Want RGB and a mute button on your desk | Fifine AmpliGame AM8 | Listed RGB and mute features |
| Use a phone, tablet or console-adjacent setup | Shure MV6 Gen 2 | USB-C support across several platforms |
| Need automatic level control | Shure MV6 Gen 2 | Auto Level Mode listed |
| Have a boom arm already | Fifine AM8 or Samson Q2U | Standard threads and clips |
Budget tiers inside the cap
At the budget end, the Fifine AM8 and Samson Q2U give you a dynamic microphone with USB and XLR connections. The Shure MV6 Gen 2 sits at or above the top of the cap, trading XLR for processing features and a more polished software tool set. Most voice use is satisfied by the lower tier; the extra processing is helpful if you do not want to tweak levels and EQ yourself.
Software, monitoring and room tips
Dynamic USB microphones are forgiving, but a few habits make any of them sound better. Keep the headphone monitor level comfortable so you do not raise your voice to compete with it, set the input level in your operating system so that normal speech peaks around the middle of the meter, and leave a little headroom for excited moments. Soft furnishings such as curtains, rugs and a bookcase behind you reduce echo. If you add an interface later, set its gain by speaking at normal volume rather than turning it up until the room hiss appears.
Alternatives
- A budget condenser: If your room is quiet, a USB condenser may sound more detailed. See the USB microphone guide in this series.
- A classic stage dynamic on XLR: Works with an audio interface and is robust, but needs the interface and cable you would otherwise skip.
Frequently Asked Questions
Are dynamic microphones better than condensers?
They are better at rejecting background noise and room echo when used close, and condensers are better at capturing detail in a quiet space. Neither is universally better. Choose by the room you actually record in.
Why does my dynamic microphone sound quiet?
Dynamic microphones put out less signal and are designed to be used close to the mouth. Move closer, aim at the mouth and raise gain in software or on the interface. USB models include their own gain control, while XLR use depends on the preamp.
Can I use these on a console?
Support varies. Shure’s MV6 Gen 2 is listed for PC, Mac, iOS and Android rather than consoles. Check each maker’s manual for console notes before relying on one.
Do I need an audio interface?
Not for USB use. You need one only if you want to use the XLR output of the Q2U or AM8. With a hybrid microphone you can postpone that purchase.
Will it pick up my keyboard?
Any microphone can, but a dynamic used close and aimed away from the keys picks up much less than a condenser at arm’s length. A boom arm that keeps it close to your mouth makes the biggest difference.
What is a pop filter for?
It softens sudden bursts of air from sounds like p and b. The Q2U includes a foam windscreen, and the Shure MV6 Gen 2 uses a digital popper stopper.
Read next
- Best USB Microphone under $100: Picks and What to Look For (2026)
- Best Streaming Microphone under $100: Picks and What to Look For (2026)
- Best Wireless Gaming Headset under $100: Picks and What to Look For (2026)
- Best Gaming Speakers under $100: Picks and What to Look For (2026)
- Best Audio Interface under $150: Picks and What to Look For (2026)



